TSC 8 BLIND PRESSED NUTS

TSC 8  BLIND PRESSED NUTS

TSC 8 - DIMENSIONS & SPECIFICATIONS									(MM)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.08 -0.00	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.25	MIN
M3X0.5	3501	3.80	1.00	4.25	4.22	8.50	0.97	6.35	4.80
	3502		1.40				1.37
M4X0.7	4701	5.20	1.00	5.40	5.38	9.80	0.97	7.95	6.90
	4702		1.40				1.37
M5X0.8	5801	6.00	1.00	6.40	6.38	9.80	0.97	8.75	7.10
	5802		1.40				1.37
M6X1.0	6101	7.80	1.40	8.75	8.72	12.70	1.37	11.10	8.60
	6102		2.30				2.21

TSC 8 - DIMENSIONS & SPECIFICATIONS									(INCH)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.003 -0.000	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.01	MIN
#4-40	4401	0.149	0.040	0.166	0.165	0.335	0.038	0.250	0.190
	4402		0.056				0.054
#6-32	6321	0.169	0.040	0.187	0.186	0.335	0.038	0.280	0.220
	6322		0.056				0.054
#8-32	8321	0.204	0.040	0.213	0.212	0.385	0.038	0.310	0.270
	8322		0.056				0.054
#10-32	10321	0.235	0.040	0.250	0.249	0.385	0.038	0.340	0.280
	10322		0.056				0.054
1/4-20	4201	0.305	0.056	0.344	0.343	0.500	0.054	0.430	0.340
	4202		0.090				0.087

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

★ Other sizes, material are available upon request.