TSC 7 SELF-CLINCHING STANDOFFS

TSC 7  
SELF-CLINCHING STANDOFFS

TSC 7 - DIMENSIONS & SPECIFICATIONS																(MM)
THREAD SIZE	P/N.	L LENGTH ±0.08											+0.08 -0.00	D DIM +0.00 -0.13	MIN	MIN
		TYPES				TYPE ST		TYPE SC
M2.5X0.45	2545	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	2545B												5.40	5.38	7.10	0.63
M3.0X0.5	350	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	350B												5.40	5.38	7.10	0.63
M3.5X0.6	356		2	3	4	6	8	10	12	14	16	18	5.40	5.38	7.10	0.63

TSC 7 - DIMENSIONS & SPECIFICATIONS																(INCH)
THREAD SIZE	P/N.	L LENGTH ±0.003												+0.003 -0.000	D DIM +0.000 -0.005	MIN	MIN
		TYPES				TYPE ST		TYPE SC
#2-56	256	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	256B													0.213	0.212	0.270	0.025
#4-40	440	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	440B													0.213	0.212	0.270	0.025
#6-32	632		0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.213	0.212	0.270	0.025

ADVANTAGES OF CLINCHING PARTS:

• May be installed using any parallel acting squeezing force.

• Provide high pushout and torque-out resistance.

• Do not require special hole preparation, such as chamfering and deburring.

• Reverse side of metal sheet remains flush.

• No retapping necessary after application.

• Low installed costs.

★ STANDOFFS：

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

★ Other sizes, material are available upon request.