TSC 6 SELF-CLINCHING STUDES

TSC 6 SELF-CLINCHING STUDS

TSC 6 - DIMENSIONS & SPECIFICATIONS     (MM) THREAD SIZE P/N. L LENGTH ±0.40 D ±0.40 +0.08 -0.00 MAX. REC. NUT TIGHT. TORQUE N.m MIN MIN   M2.5X0.45 2545 6 8 10 12 15 18 　 　 　 　 　 　 　 4.1 2.5 0.40 5.4 1.0   M3X0.5 350 6 8 10 12 15 18 20 22 25 　 　 　 　 4.6 3.2 0.72 5.6 1.0   M3.5X0.6 356 6 8 10 12 15 18 20 22 25 28 30 　 　 5.3 3.5 1.10 6.4 1.0   M4X0.7 470 6 8 10 12 15 18 20 22 25 28 30 35 38 5.9 4.0 1.60 7.2 1.0   M5X0.8 580 　 8 10 12 15 18 20 22 25 28 30 35 38 6.5 5.0 3.40 7.2 1.0   M6X1.0 610 　 　 10 12 15 18 20 22 25 28 30 35 38 8.2 6.0 5.70 7.9 1.6   M8X1.25 8125 　 　 　 12 15 18 20 22 25 28 30 35 38 9.6 8.0 14.00 9.6 2.4 TSC 6 - DIMENSIONS & SPECIFICATIONS     (INCH) THREAD SIZE P/N. L LENGTH ±0.015 D ±0.015 +0.003 -0.000 MAX. REC. NUT TIGHT. TORQUE IN.-LBS MIN MIN   #2-56 256 0.250 0.3125 0.375 0.500 0.625 0.750 　 　 　 　 0.144 0.085 2.5 0.187 0.040   #4-40 440 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 　 　 0.176 0.111 5 0.219 0.040   #6-32 632 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.206 0.137 10 0.250 0.040   #8-32 832 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.237 0.163 15 0.281 0.040   #10-24 1024 　 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.256 0.189 25 0.281 0.040   #10-32 1032 　 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.256 0.189 30 0.281 0.040   1/4-20 420 　 　 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.337 0.249 55 0.312 0.062   5/16-18 518 　 　 　 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.376 0.311 115 0.375 0.093

★ CLICK ME TO SEE HOW TO INSTALL THE CLINCHING PART - TSC6

★ CLICK ME TO SEE TORQUE TO TURN TESTING - TSC6

★ CLICK ME TO SEE PUSH-OUT TESTING - TSC6

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 

Steel, Stainless Steel

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

★ STUDS：

Externally threaded fasteners which are used where the attachment must be positioned before being fastened.

★ Other sizes, material are available upon request.