快速擊釘 SPEED PIN RIVET / DRIVE PIN RIVET

快速擊釘

SPEED PIN RIVET / DRIVE PIN RIVET

材質: 

身體: 鋁 2117 / 白鐵 302 (INOX A2) / 鐵 1006

芯: 鋁 2024 / 白鐵 304 (INOX A2) / 鐵 1022

MATERIAL AVAILABLE:

BODY: Aluminum 2117 / Stainless Steel 302 (INOX A2/18-8) / Steel 1006

PIN: Aluminum 2024 / Stainless steel 304 (INOX A2/18-8) / Steel 1022

表面處理:

鍍三價白/黃/黑鋅、陽極處理、洗清。

FINISH SURFACE AVAILABLE:

PLATING: CR3 white zinc plated/ CR3 yellow zinc plated/ CR3 black zinc plated/ anodized/ clean

 * 快速擊釘安裝容易且快速。
 * 一把鐵鎚即可安裝快速擊釘，不需特殊工具。
 * 快速擊釘可以各種材料製成。 
 * 快速擊釘頭型多樣化。
 * 快速擊釘拆卸簡單且不會對物件表面造成傷害。
 * 快速擊釘抗鏽。
 * 快速擊釘適用於各種厚度。
 * 安裝快速擊釘後外型美觀。
 
 * Speed pin rivet is fast and easy to install.
 * No special installation tool is required for speed pin rivet, just a hammer will do.
 * Various materials are available for speed pin rivet.
 * Various head styles are available for speed pin rivet.
 * Speed pin rivet is easy to uninstall, and it will not damage the application surface.
 * Speed pin rivet can be rust resistant.
 * Speed pin rivet can be applied to wide thickness.
 * The appearance looks good after installation.

★ 其他尺寸和材質可依客戶要求訂製。

SECURITY SYSTEM SEX BOLTS - ONE WAY, SIX LOBE, E SELF DRIVING NUT, TRUSS COMBO HEAD, ARCHITECTURAL SEX BOLTS

SECURITY SYSTEM

ONE WAY SEX BOLTS

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

SIX LOBE WITH PIN SEX BOLT

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DISMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

E-SELF DRIVING NUT

MATERIAL AVAILABLE: 

STEEL, STAINLESS STEEL AND BRASS

ADVANTAGES:

• INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.

• INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.

• INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.

• INSTALL INTO VARIES MATERIAL.

• THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.

• EASY, FAST & SAFE INSTALLATION.

INSTRUCTIONS OF E-SELF DRIVING NUT:

AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

FEATURE OF E-SELF DRIVING NUT

(COMPARE WITH SEX BOLTS)

1.    ROUND BODY WITH FANGS ON IT

• GRIP THE APPLICATION TIGHTLY
• CANNOT BE DISASSEMBLED EASILY
• PREVENT ANY ONE WHO INTENT TO PULL OUT

2.    SCREW HEAD CAN BE YOUR CHOICE

• THE SCREW HEAD CAN BE TAMPER-PROOF
• HARDLY TO DISASSEMBLED
• COMBINE WITH GOOD SURFACE OUTLOOK 

TRUSS COMBO HEAD POST SCREW

MATERIAL AVALIABLE: 

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

ARCHITECTURAL SEX BOLTS

MATERIAL：

STEEL, STAINLESS STEEL, ALUMINUM, BRASS

FETURES & ADVANTANGES：

• No way to turn the sex bolt, because Architectural Sex Bolts have smooth Truss Heads - no drive.

• The knurled barrel keeps the sex bolt from spinning while the flat head screw is tightened from the other side.

• Strong, secure, easy to assemble.

• Good looking solution for many sheet metal anchoring applications.

• Particular useful in fiberglass marine applications.

APPLICATIONS：

• Door and Lock Accessory mounts

• Hurricane Protection Shutters

• Elevator Protection Gates

• HVAC ventilation

• Docks and Construction projects

• Architectural - Railings, Cabinetry, Shutters, Seats, and more.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON 

REQUEST

TSC 8 BLIND PRESSED NUTS

TSC 8  BLIND PRESSED NUTS

TSC 8 - DIMENSIONS & SPECIFICATIONS									(MM)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.08 -0.00	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.25	MIN
M3X0.5	3501	3.80	1.00	4.25	4.22	8.50	0.97	6.35	4.80
	3502		1.40				1.37
M4X0.7	4701	5.20	1.00	5.40	5.38	9.80	0.97	7.95	6.90
	4702		1.40				1.37
M5X0.8	5801	6.00	1.00	6.40	6.38	9.80	0.97	8.75	7.10
	5802		1.40				1.37
M6X1.0	6101	7.80	1.40	8.75	8.72	12.70	1.37	11.10	8.60
	6102		2.30				2.21

TSC 8 - DIMENSIONS & SPECIFICATIONS									(INCH)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.003 -0.000	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.01	MIN
#4-40	4401	0.149	0.040	0.166	0.165	0.335	0.038	0.250	0.190
	4402		0.056				0.054
#6-32	6321	0.169	0.040	0.187	0.186	0.335	0.038	0.280	0.220
	6322		0.056				0.054
#8-32	8321	0.204	0.040	0.213	0.212	0.385	0.038	0.310	0.270
	8322		0.056				0.054
#10-32	10321	0.235	0.040	0.250	0.249	0.385	0.038	0.340	0.280
	10322		0.056				0.054
1/4-20	4201	0.305	0.056	0.344	0.343	0.500	0.054	0.430	0.340
	4202		0.090				0.087

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

★ Other sizes, material are available upon request.

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7  
SELF-CLINCHING STANDOFFS

TSC 7 - DIMENSIONS & SPECIFICATIONS																(MM)
THREAD SIZE	P/N.	L LENGTH ±0.08											+0.08 -0.00	D DIM +0.00 -0.13	MIN	MIN
		TYPES				TYPE ST		TYPE SC
M2.5X0.45	2545	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	2545B												5.40	5.38	7.10	0.63
M3.0X0.5	350	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	350B												5.40	5.38	7.10	0.63
M3.5X0.6	356		2	3	4	6	8	10	12	14	16	18	5.40	5.38	7.10	0.63

TSC 7 - DIMENSIONS & SPECIFICATIONS																(INCH)
THREAD SIZE	P/N.	L LENGTH ±0.003												+0.003 -0.000	D DIM +0.000 -0.005	MIN	MIN
		TYPES				TYPE ST		TYPE SC
#2-56	256	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	256B													0.213	0.212	0.270	0.025
#4-40	440	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	440B													0.213	0.212	0.270	0.025
#6-32	632		0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.213	0.212	0.270	0.025

ADVANTAGES OF CLINCHING PARTS:

• May be installed using any parallel acting squeezing force.

• Provide high pushout and torque-out resistance.

• Do not require special hole preparation, such as chamfering and deburring.

• Reverse side of metal sheet remains flush.

• No retapping necessary after application.

• Low installed costs.

★ STANDOFFS：

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

★ Other sizes, material are available upon request.