Aug 1, 2019

SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS

襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,襯套工具,手動工具,襯套,螺紋襯套,自攻螺紋襯套,3孔襯套,3孔螺紋襯套,鐵襯套,白鐵襯套,銅襯套,襯套工具,手動工具,螺?
SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS
I. HOLE SIZE: 
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

II. HOLE DEPTH: 
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

III. COUNTERSINK 
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

IV. WALL THICKNESS 
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

 OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
 
STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT STEEL BLIND RIVET NUT, STAINLESS STEEL BLIND RIVET NUT, STAINLESS STEEL 316 BLIND RIVET,Fasteners, rivet nut, inserts, rivet, nuts, screws, bolts, studs, blind rivet nuts , self-clinching, bolt rivet nuts, e self-driving nut, self-tapping threaded inserts, sex bolts, PEM nut, binding post, Chicago screw, barrel nut, post, special blind rivet, security fastener, blind jack nut, welding stud, hardware parts, construction hardware,BLIND NUT, RIVET NUT, TOP SCREW METAL CORP, TOPS SCREW METAL CORP,INSERT NUT  

No comments:

Post a Comment