BLIND JACK NUT
THE BLIND JACK NUT IS AN ECONOMICAL BLIND FASTENER DESIGNED FOR ASSEMBLY LIND USE IN THIN, SOFT OR BRITTLE MATERIALS. WHEN TIGHTENED, THEIR BODY COLLAPSES TO FORM LEGS WHICH GRIP THE INSIDE OF THE MOUNTING SURFACE, LEAVING A PERMANENT REUSABLE THREADED INSERT. STANDARD BLIND JACK NUT ARE MANUFACTURED OF STEEL WITH A COMMERCIAL ZINC PLATING. ALL BLIND JACK NUTS CAN BE SUPPLIED WITH BRASS COATED FLANGES WHICH ASSIST GALVANIC CORROSION CONCERNS.
 | ||
| 1. THREAD INSERT ONTO THE MANDREL OF INSTALLATION TOOL, THEN INSERT ALL THE WAY IN TO PREDRILLED HOLE UNTIL FLANGE IS FIRMLY AGAINST MOUNTING SURFACE | 2. FULLY COLLAPSE INSERT, THEN REMOVE TOOL | 3. PASS MACHINE SCREW THROUGH PART TO BE FASTENED, THEN TIGHTEN UNTIL SNUG |
| PART NO. | THREAD SIZE. | SCREW | GRIP RANGE (mm) | HOLE SIZE (mm) | TOTAL LENGTH (mm) |
| TJM01 | M4 | M4X25 | 0-5 | 8 | 17 |
| TJM02 | M4 | M4X30 | 5-10 | 8 | 22 |
| TJM03 | M5 | M5X26 | 0-5 | 10 | 18 |
| TJM04 | M5 | M5X31 | 5-10 | 10 | 23 |
| TJM05 | M6 | M6X27 | 0-5 | 11 | 18 |
| TJM06 | M6 | M6X32 | 5-10 | 11 | 23 |
| TJU01 | 1/8 | 6-32X25 | 0-5 | 8 | 17 |
| TJU02 | 1/8 | 6-32X30 | 5-10 | 8 | 22 |
| TJU03 | 3/16 | 10-24X26 | 0-5 | 10 | 18 |
| TJU04 | 3/16 | 10-24X31 | 5-10 | 10 | 23 |
| TJU05 | 1/4 | 1/4-20X27 | 0-5 | 11 | 18 |
| TJU06 | 1/4 | 1/4-20X32 | 5-10 | 11 | 23 |
FEATURES：
- FASTENS IN BLIND HOLES
- FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
- NOT HOLE SIZE SENSITIVE
- SUITABLE FOR WIDE GRIP RANGE
| BLIND JACK NUT TOOL AN ECONOMICAL, EASY TO USE TOOL FOR LOW-VOLUME INSTALLATION IN ANY MATERIAL. THREAD PULL-ROD INTO BLIND JACK NUT, INSERT INTO HOLE, AND SQUEEZE HANDLES TO SET. INTERCHANGEABLE PULL-OUT RODS AVAILABLE TO SET ALL SIZES. PNEUMATIC BLIND JACK NUT TOOL ALSO AVAILABLE. |  |
MATERIAL AVAILABLE FOR BLIND JACK NUT:
STEEL
STEEL
★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
No comments:
Post a Comment