REBITADOR MANUAL

REBITADOR MANUAL

 

WEIGHT：0.6kg (1.32lb)
RIVET SIZE：2.4mm(3/32"),3.2mm(1/8"),4.0mm(5/32"),4.8mm(3/16").

RIVET MATERIAL：ALUMINUM & BRASS

RIVET FETURE：
1.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
2.EASY, FAST & SAFE INSTALLATION.

MALE FEMALE RIVET

MALE FEMALE RIVET

MATERIAL: ALUMINUM 5052 BRASS 2600 STAINLESS STEEL 302 / 410

APPLICATION : TABLEWARE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

  

SPEED PIN RIVET DRIVE PIN RIVET

SPEED PIN RIVET / DRIVE PIN RIVET

MATERIAL AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET): 
BODY: ALUMINUM 2117 / STAINLESS STEEL 302 (INOX A2/18-8) / STEEL 1006
PIN: ALUMINUM 2024 / STAINLESS STEEL 304 (INOX A2/18-8) / STEEL 1022

FINISH SURFACE AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET): 
PLATING: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED/ CR3 BLACK ZINC PLATED/ ANODIZED/CLEAN

ADVANTAGES OF SPEED PIN RIVET (DRIVE PIN RIVET): 
1.SPEED PIN RIVET IS FAST AND EASY TO INSTALL.
2.NO SPECIAL INSTALLATION TOOL IS REQUIRED FOR SPEED PIN RIVET, JUST A HAMMER WILL DO.
3.VARIOUS MATERIALS ARE AVAILABLE FOR SPEED PIN RIVET.
4.VARIOUS HEAD STYLES ARE AVAILABLE FOR SPEED PIN RIVET.
5.SPEED PIN RIVET WILL NOT DAMAGE THE APPLICATION SURFACE
6.SPEED PIN RIVET CAN BE RUST RESISTANT.
7.SPEED PIN RIVET CAN BE APPLIED TO WIDE THICKNESS.
8.THE APPEARANCE LOOKS GOOD AFTER INSTALLATION.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
★Available Size:5/32"、5/16"、3/16"、3/8"、1/8"、1/4"、

SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS

SELF TAPPING THREADED INSERT
MANUAL INSTALLATION TOOLS

I. HOLE SIZE: 
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

II. HOLE DEPTH: 
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

III. COUNTERSINK 
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

IV. WALL THICKNESS 
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

   

SELF TAPPING THREAD INSERTS - SLOTTED SERIES

SELF TAPPING THREAD INSERTS
SLOTTED SERIES

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604

SURFACE FINSIH AVAILABLE: 
CR3 WHITE/YELLOW ZINC PLATED

CHARACTERISTICS: 
1.EASY TO INSTALLED.
2.DESIGNED TO REPLACE SPRING COIL.
3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.
4.ABLE TO INSTALL FOR VIBRATING ENVIRONMENT.

APPICATIONS: 
1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

SELF TAPPING THREAD INSERTS - SLOTTED SERIES

 

SELF TAPPING THREADED INSERT W. SLOTTED PIN

SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THICK WALL OR CLOSE TO AN EDGE

ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION

 

SELF TAPPING THREADED INSERT W. THREE CUTTING HOLE

SELF TAPPING THREADED INSERT
W. THREE CUTTING HOLE

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS

FOR USE IN THICK WALL OR CLOSE TO AN EDGE

ADVANTAGE:
1.HIGH PULL-OUT STRENGTH
2.HIGH TORQUE RESISTANCE
3.STRONG WEAR RESSTANCE THREAD
4.FAST, EASY INSTALLATION
5.EXTREME VIBRATION RESISTANCE

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

THICK WALL SECTION
SELF TAPPING THREAD INSERTS W. THREE CUTTING HOLE - THICK WALL SECTION

 

BINDING POST SCREW ,CHICAGO SCREW

BINDING POST
CHICAGO SCREW

MATERIAL AVALIABLE: 
ALUMINUM, BRASS, STAINLESSSTEEL

SURFACE FINISH AVALIABLE: 
CLEAN

GREAT CHOICE FOR SWATCH BOOKS, ARCHITECTURAL AND ENGINEERING DRAWINGS, OR ANY APPLICATION WHERE LOOSE SHEETS NEED TO BE KEPT TOGETHER.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

   

 

E SELF-DRIVING NUT

E SELF-DRIVING NUT
MATERIAL AVALIABLE: 
STEEL, STAINLESS STEEL AND BRASS

ADVANTAGES:
1.INSTALL SLEEVE NUT TO ACCESS FRONT SIDE OF THE WORK PIECE & SCREW IN FROM BACK SIDE.
2.INSTALL WITHOUT ANY COMPLICATED TOOL AT ANY LOCATION ON THE ASSEMBLY.
3.INSTALL WITHOUT PRODUCING ANY HARMFUL MARK.
4.INSTALL INTO VARIES MATERIAL.
5.THE FANGS ON THE BODY CUT INTO THE APPLICATION DURING ASSEMBLY.
6.EASY, FAST & SAFE INSTALLATION.

INSTRUCTIONS OF E-SELF DRIVING NUT:
AS THE SLEEVE NUT IS STALLED, THE FANGS ON THE BODY ACTUALLY CUT INTO THE APPLICATION & PROVIDES GRIP STRENGTH. WHEN SCREW ON THE OPPOSITE SIDE HAVE DRIVEN, THE FANGS WILL GRIP APPLICATION TIGHTLY.

FEATURE OF E-SELF DRIVING NUT
(COMPARE WITH SEX BOLTS) 

I. ROUND BODY WITH FANGSON IT 
1.GRIP THE APPLICATION TIGHTLY
2.CANNOT BE DISASSEMBLED EASILY
3.PREVENT ANY ONE WHO INTENT TO PULL OUT

II. SCREW HEADCAN BE YOUR CHOICE 
1.THE SCREW HEAD CAN BE TAMPERPROOF
2.HARDLY TO DISASSEMBLED
3.COMBINE WITH GOOD SURFACE OUTLOOK

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

 

 

 

BUTTON HEAD SOCKET TROX WITH PIN SCREWS

MATERIAL AVALIABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

FEMALE NUT

BUTTON HEAD SOCKET TROX WITH PIN SCREWS

MATERIAL AVALIABLE: 
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

FEMALE NUT

ARCHITECTURAL SEX BOLTS

建築用公母套

ARCHITECTURAL SEX BOLTS

材質：鐵、白鐵、鋁、銅。

特色 & 優點：母套頭型採半圓頭設計，搭配的螺絲採十字平頭設計、於安裝時將母套置於外露地方，
螺絲置於後方，因母套頭型無工具可拆除，具防盜功能、可安裝於多種材質之物件、
安裝容易、快速、省力且安全、可應用的範圍廣，多使用於門窗五金、建築五金

★ 其他尺寸和材質可依客戶要求訂製。