Dec 20, 2015

Aug 25, 2015

BLIND RIVET NUT - SMALL FLANGE & FLAT HEAD BLIND RIVET NUT


 

SMALL FLANGE BLIND RIVET NUT OPEN END
SEMSAMSAI SERIES

 

FLAT HEAD BERYNUT OPEN END
BEMBAISERIES

 
 

MATERIAL AVAILABLE
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056


SURFACE FINSIH AVAILABLE
STEELCR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED
STAINLESS STEELCLEAN OR PASSIVATED
BRASSCLEAN
ALUMINUMCLEAN


CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT
THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.


THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES
EASY AND FAST INSTALLATION.
HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.


ASSEMBLY APPLICATIONS
AUTOMATIVEELECTRICAL ENGINEERINGSHEET METALGENERAL LIGHT FABRICATION



OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST

Jul 21, 2015

SECURITY SYSTEM - SIX LOBE WITH PIN OR WITHOUT PIN SEX BOLTS

SECURITY SYSTEM - SIX LOBE WITH PIN OR WITHOUT PIN SEX BOLTS


MATERIAL AVALIABLE
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Jun 29, 2015

SELF TAPPING THREADED INSERT SERIES

SELF TAPPING THREADED INSERT SERIES












  SLOTTED PART






MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 / 18-10), BRASS C3604
SURFACE FINSIH AVAILABLE:
CR3 WHITE/YELLOW ZINC PLATED
CHARACTERISTICS:
•EASY TO INSTALLED
•DESIGNED TO REPLACE SPRING COIL
•PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC
•ABLE TO INSTALL FOR VIBRATING ENVIRONMENT
APPICATIONS:
•CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.
•DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.
 THREE HOLE THIN WALL/THICK WALL







MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THICK WALL OR CLOSE TO AN EDGE
ADVANTAGE:
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE
 THREE HOLE W. SLOTTED PIN






MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL, ALUMINUM, ALUMINUM ALLOY, BRASS
FOR USE IN THIN WALL OR CLOSE TO AN EDGE
ADVANTAGE:
•HIGH PULL-OUT STRENGTH
•HIGH TORQUE RESISTANCE
•STRONG WEAR RESSTANCE THREAD
•FAST, EASY INSTALLATION
•EXTREME VIBRATION RESISTANCE
◆ MANUAL INSTALLATION TOOL

STEP 1.
STEP 2.
STEP 3.
鑽孔之後,將襯套裝置於工具上朝向要裝置的地方維持工具垂直,向左旋轉將襯套轉入裝入之後,將工具向右垂直旋轉出來,工具自然會自動地鬆開
HOLE SIZE:
RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.
HOLE DEPTH:
IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.
COUNTERSINK
A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.
WALL THICKNESS
WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.
 AIR INSTALLATION TOOLS


Jun 8, 2015

STAINLESS STEEL BLIND JACK NUTS

STAINLESS STEEL BLIND JACK NUTS
FOR LATEST TYPE LICENSE PLATE
The latest type license plates’ width and height are different from the original license plate. In addition, when you replace the license plate, you find that the holes place of the latest type license plate and the bodywork are not matched.
HOW TO SOLVE?
YOU JUST NEED OUR PRODUCT
☆ STAINLESS STEEL BLIND JACK NUT 
The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials. When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.
ADVANTAGE:
AVOID CORROSION
PREVENT RUST
SUITABLE FOR OUTDOOR
FEATURES:
FASTENS IN BLIND HOLES
FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
NOT HOLE SIZE SENSITIVE
SUITABLE FOR WIDE GRIP RANG
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

May 8, 2015

BLIND JACK NUT

BLIND JACK NUT

STEEL

















STAINLESS STEEL


















The Blind Jack Nut is an economical blind fastener designed for assembly lind use in THIN, SOFT or BRITTLE materials.
When tightened, their body collapses to form legs which grip the inside of the mounting surface, leaving a permanent reusable threaded insert.
Standard blind jack nut are manufactured of steel with a commercial zinc plating.
All blind jack nuts can be supplied with brass coated which assist galvanic corrosion concerns.

MATERIAL AVAILABLE
STEEL, STAINLESS STEEL304, BRASS

FEATURES
FASTENS IN BLIND HOLES
FASTENS SECURELY DESPITE BURRS & UNEVEN SUBSTRATES
NOT HOLE SIZE SENSITIVE
SUITABLE FOR WIDE GRIP RANGE

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST



Apr 9, 2015

PLUSNUT – STANDARD & PRE-BULBED

PLUSNUT – STANDARD

( QUAD FOLDING RIVETNUTS / SPLIT NUT )

 PLUSNUT – PRE-BULBED
( QUAD FOLDING RIVETNUTS / SPLIT NUT )
FEATURES:
  • SUPERB PULL-OUT STRENGTH, EXCEPTIONAL TORQUE.
  • WIDE GRIP RANGE.
  • FASTENS SECURELY IN UNEVEN SURFACES.
  • INSTALLS CLEANLY WITHOUT DISTORT, DEFORM OR DAMAGING PARENT MATERIAL (EX. SOFT PLASTICS, THIN SHEET METAL).
  • THE FOUR LEGS ARE PULLED TOGETHER EXPANDING OUTWARDS BEHIND THE SURFACE MATERIAL TO PROVIDE A LARGE LOAD BEARING AREA.
  • SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES.
APPLICATIONS:
  • AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT)
  • AUTOMOBILES AND MOTORCYCLES PARTS AND MOLDINGS (E.G., CAR TOP CARRIERS)
  • TRUCKS AND TRAILERS SANDWICH SECTIONS AND PANELLING.
  • DOMESTIC APPLIANCES – HANDLES, ADJUSTABLE FEET AND FIXING POINTS.
  • PLASTIC FABRICATIONS:ELECTRONICS, ENCLOSURES…ETC.
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Mar 27, 2015

SMALL FLANGE & FLAT HEAD BLIND RIVET NUT

SMALL FLANGE BLIND RIVET NUT, OPEN END
SEM, SAM, SAI SERIES
 FLAT HEAD BERYNUT, OPEN END
BEM, BAI, SERIES

MATERIAL AVAILABLE:
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE:
  • STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
     
  • STAINLESS STEEL: CLEAN OR PASSIVATED.
     
  • BRASS: CLEAN
     
  • ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT:
  • THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
  • THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
  • THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
  • THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
  • APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES:
  • EASY AND FAST INSTALLATION.
  • HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS:
  • AUTOMATIVE
  • ELECTRICAL ENGINEERING
  • SHEET METAL
  • GENERAL LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST