TSC 8 BLIND PRESSED NUTS

TSC 8  BLIND PRESSED NUTS

TSC 8 - DIMENSIONS & SPECIFICATIONS									(MM)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.08 -0.00	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.25	MIN
M3X0.5	3501	3.80	1.00	4.25	4.22	8.50	0.97	6.35	4.80
	3502		1.40				1.37
M4X0.7	4701	5.20	1.00	5.40	5.38	9.80	0.97	7.95	6.90
	4702		1.40				1.37
M5X0.8	5801	6.00	1.00	6.40	6.38	9.80	0.97	8.75	7.10
	5802		1.40				1.37
M6X1.0	6101	7.80	1.40	8.75	8.72	12.70	1.37	11.10	8.60
	6102		2.30				2.21

TSC 8 - DIMENSIONS & SPECIFICATIONS									(INCH)
THREAD SIZE	P/N.	BARREL DIA. B MAX.	MIN	+0.003 -0.000	SHANK DIA. C MAX.	L MAX.	A MAX.	E ±0.01	MIN
#4-40	4401	0.149	0.040	0.166	0.165	0.335	0.038	0.250	0.190
	4402		0.056				0.054
#6-32	6321	0.169	0.040	0.187	0.186	0.335	0.038	0.280	0.220
	6322		0.056				0.054
#8-32	8321	0.204	0.040	0.213	0.212	0.385	0.038	0.310	0.270
	8322		0.056				0.054
#10-32	10321	0.235	0.040	0.250	0.249	0.385	0.038	0.340	0.280
	10322		0.056				0.054
1/4-20	4201	0.305	0.056	0.344	0.343	0.500	0.054	0.430	0.340
	4202		0.090				0.087

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

★ NUTS：

Nuts with thread strengths greater than mild steel screws are commonly used wherever strong internal threads are needed for component attachment of fabrication assembly.

★ Other sizes, material are available upon request.

TSC 7 SELF-CLINCHING STANDOFFS

TSC 7  
SELF-CLINCHING STANDOFFS

TSC 7 - DIMENSIONS & SPECIFICATIONS																(MM)
THREAD SIZE	P/N.	L LENGTH ±0.08											+0.08 -0.00	D DIM +0.00 -0.13	MIN	MIN
		TYPES				TYPE ST		TYPE SC
M2.5X0.45	2545	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	2545B												5.40	5.38	7.10	0.63
M3.0X0.5	350	2	3	4	6	8	10	12	14	16	18	19	4.20	4.19	5.80	0.63
	350B												5.40	5.38	7.10	0.63
M3.5X0.6	356		2	3	4	6	8	10	12	14	16	18	5.40	5.38	7.10	0.63

TSC 7 - DIMENSIONS & SPECIFICATIONS																(INCH)
THREAD SIZE	P/N.	L LENGTH ±0.003												+0.003 -0.000	D DIM +0.000 -0.005	MIN	MIN
		TYPES				TYPE ST		TYPE SC
#2-56	256	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	256B													0.213	0.212	0.270	0.025
#4-40	440	0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.750	0.166	0.165	0.230	0.025
	440B													0.213	0.212	0.270	0.025
#6-32	632		0.090	0.125	0.187	0.250	0.312	0.375	0.437	0.500	0.562	0.625	0.687	0.213	0.212	0.270	0.025

ADVANTAGES OF CLINCHING PARTS:

• May be installed using any parallel acting squeezing force.

• Provide high pushout and torque-out resistance.

• Do not require special hole preparation, such as chamfering and deburring.

• Reverse side of metal sheet remains flush.

• No retapping necessary after application.

• Low installed costs.

★ STANDOFFS：

Used where it is necessary to stack or space components away from the panel.

Thru-threaded or blind types are generally standard.

★ Other sizes, material are available upon request.

TSC 6 SELF-CLINCHING STUDES

TSC 6 SELF-CLINCHING STUDS

TSC 6 - DIMENSIONS & SPECIFICATIONS     (MM) THREAD SIZE P/N. L LENGTH ±0.40 D ±0.40 +0.08 -0.00 MAX. REC. NUT TIGHT. TORQUE N.m MIN MIN   M2.5X0.45 2545 6 8 10 12 15 18 　 　 　 　 　 　 　 4.1 2.5 0.40 5.4 1.0   M3X0.5 350 6 8 10 12 15 18 20 22 25 　 　 　 　 4.6 3.2 0.72 5.6 1.0   M3.5X0.6 356 6 8 10 12 15 18 20 22 25 28 30 　 　 5.3 3.5 1.10 6.4 1.0   M4X0.7 470 6 8 10 12 15 18 20 22 25 28 30 35 38 5.9 4.0 1.60 7.2 1.0   M5X0.8 580 　 8 10 12 15 18 20 22 25 28 30 35 38 6.5 5.0 3.40 7.2 1.0   M6X1.0 610 　 　 10 12 15 18 20 22 25 28 30 35 38 8.2 6.0 5.70 7.9 1.6   M8X1.25 8125 　 　 　 12 15 18 20 22 25 28 30 35 38 9.6 8.0 14.00 9.6 2.4 TSC 6 - DIMENSIONS & SPECIFICATIONS     (INCH) THREAD SIZE P/N. L LENGTH ±0.015 D ±0.015 +0.003 -0.000 MAX. REC. NUT TIGHT. TORQUE IN.-LBS MIN MIN   #2-56 256 0.250 0.3125 0.375 0.500 0.625 0.750 　 　 　 　 0.144 0.085 2.5 0.187 0.040   #4-40 440 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 　 　 0.176 0.111 5 0.219 0.040   #6-32 632 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.206 0.137 10 0.250 0.040   #8-32 832 0.250 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.237 0.163 15 0.281 0.040   #10-24 1024 　 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.256 0.189 25 0.281 0.040   #10-32 1032 　 0.3125 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.256 0.189 30 0.281 0.040   1/4-20 420 　 　 0.375 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.337 0.249 55 0.312 0.062   5/16-18 518 　 　 　 0.500 0.625 0.750 0.875 1.00 1.25 1.50 0.376 0.311 115 0.375 0.093

★ CLICK ME TO SEE HOW TO INSTALL THE CLINCHING PART - TSC6

★ CLICK ME TO SEE TORQUE TO TURN TESTING - TSC6

★ CLICK ME TO SEE PUSH-OUT TESTING - TSC6

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 

Steel, Stainless Steel

ADVANTAGES OF CLINCHING PARTS:

·         May be installed using any parallel acting squeezing force.

·         Provide high pushout and torque-out resistance.

·         Do not require special hole preparation, such as chamfering and deburring.

·         Reverse side of metal sheet remains flush.

·         No retapping necessary after application.

·         Low installed costs.

★ STUDS：

Externally threaded fasteners which are used where the attachment must be positioned before being fastened.

★ Other sizes, material are available upon request.